Critical Open Tasks

[CTRifle]

Why thank you, still lots to do tho!

[Rhino]

sorry slightly forgot about this, just remembered

Nice work although a few pointers, first of all abit bright, if you compare it to the other flags on the sheets its really bright when you look at it ingame



There is also a bit of a gap between the stem back of the flag and the flag as you can see above.

I fixed both these things, bridging the gap and toning down the brightness/contrast, also added some padding round the edges to stop the black borders and think its good now


Cheers!

EDIT: still quite bright in the sunlight even with my toned down colours ingame, but think its good

[CTRifle]

thanks, never done that before so didnt know exactly what was needed but thanks

[ZondaX15]

Just did the Mirage. Based it off the main one on this thread, but used colours from another photo of a scale model.

[Rhino]

nice work but not sure about the blue, doesn't seem to be a very common camo? Possibly this one might be better? http://i.imgur.com/1sNle.jpg

Other than that, nice work

[Doc.Pock]

I love it. Would you want to texture my iai dagger when its done? I can suply u with tons of refs from rhino

[Rhino]

he already has my refs

[Panzerfire]

Nice Mirage. Looking very good.

[Doc.Pock]

he already has my refs

ok. ive been going over them and they prove to be quite more useull than the ones i had before

[Rhino]

any extra you have on top of my ones please upload thou, you can never have enough refs

[ZondaX15]

Don't you just love it when the 'magic wand tool' works exactly the way you want it to?
Here's what I've come up with now.

[CTRifle]

that looks great! awesome work man

[ZondaX15]

Just did the Dragger. Modified the Mirage skin aswell, just so it looked ok with the same drop tanks.

[ZondaX15]

Just finished the drop tanks. There is some overlapping UVs in there, so I did the best with what I had.




I know that in these screenshots they're pretty plain looking (like, not panel lines or anything), but rest assured, I have fixed it now

[Doc.Pock]

looks awesome as always.
rhino ill see how many of my old refs i can find between the pile you gave me as i mixed it all...

[Rhino]

Ye the drop tanks are modified harrier ones and its UVs are quite odd, not properly stitched up etc, realized that after I had done all its lods and then tried to make an AO map for it
Might try and fix the UVs up a bit later

Looking good but I don't think both of them should have the yellow bits, even if a slightly different layout think only the Dagger should have the yellow bits to make it more easily identifiable at range from the mirage

Also the daggers nose needs tweaking a bit, currently the black comes back way too far. Also shouldn't have "Mirage III" under the cockpit and should instead have the other markings we talked about, take it you just haven't got round to that yet
Also checking the Mirages refs I think the black on its nose should be shorter too.

The glass on both of them also needs redoing since orignally the glass wasn't UVed to the main sheet, one of the fixes I made but I UVed it to a semi-emtpy part of the sheet, but it had all thous details on the glass which needs to be made a somewhat plain colour if you can
Also the HUD glass needs to be fixed too, currently brown on that texture.

Other than that looking good so far!


@DP: if you can simplest thing to do is just upload everything you have in that case, both your old ones and my new ones

Cheers!

[Doc.Pock]

will do...

question for u rhino:
my model starts to dissapear in viewport when im zooming in and it worked yesterday and it dissappers far away....

[Rhino]

haven't had that problem but I haven't used traditional max viewport tools since I got my spacepilot

[Doc.Pock]

well i scaled up and down a bit till it wrked lol. thnx adriaan

[Rhino]

BTW you should really work in 1:1 metric scale, makes everything so much simpler for the exporter.