Mumble keeps "kinda" disconnecting

[mOsInNaGaNt]

Try running PR in windowed mode. It worked for me. Also if your getting a low fps try decreasing your view distance down to about 75-80 % .
Hope it works for you.

Cheers



My specs:

Code: Select all

System Information
------------------
  Operating System: Microsoft Windows XP Home Edition (5.1.2600)
          Language: English (United States)
       Motherboard: Dell Inc.           0K3464
         Processor:               Intel(R) Pentium(R) 4 CPU 3.60GHz (Physical: 1, Logical: 2)
            Memory: 3.50 GB
      DIMM Modules: CHANNEL A DIMM 0: 512.00 MB @ 533 MHz
                    CHANNEL B DIMM 0: 2.00 GB @ 533 MHz
                    CHANNEL A DIMM 1: 512.00 MB @ 533 MHz
                    CHANNEL B DIMM 1: 512.00 MB @ 533 MHz
         Page File: -1071869952.00 B
    .NET Framework: 4.0

Display Information
-------------------
 Display Device(s): Plug and Play Monitor on ATI Radeon HD 4800 Series
   Display Mode(s): 1280 x 1024 (32 bit) @ 60 Hz
    Driver Version: 6.14.10.7267
    Display Memory: 1024.00 MB
     Multisampling: 2, 4, 8
               DPI: 96 (100%)

Audio Information
-----------------
  Primary Playback: SB Audigy 2 Audio [C8C0]
 Primary Recording: SB Audigy 2 Audio [C8C0]
               EAX: True
           EAX 1.0: True
           EAX 2.0: True
           EAX 3.0: True
           EAX 4.0: True
           EAX 5.0: False
             X-RAM: False

Disk Information
----------------
      Install Path: C:\Program Files\Steam\steamapps\common\battlefield 2
                    Free: 6.97 GB, Total: 145.46 GB, NTFS
          Mod Path: C:\Program Files\Steam\steamapps\common\battlefield 2\mods\pr
                    Free: 6.97 GB, Total: 145.46 GB, NTFS
     Profiles Path: C:\Documents and Settings\chuck\My Documents\ProjectReality\Profiles
                    Free: 6.97 GB, Total: 145.46 GB, NTFS
    Update DL Path: C:\Documents and Settings\chuck\Local Settings\Application Data\Project Reality\Project Reality BF2\Downloads
                    Free: 6.97 GB, Total: 145.46 GB, NTFS
   Update Log Path: C:\Documents and Settings\chuck\Local Settings\Application Data\Project Reality\Project Reality BF2\UpdateLogs
                    Free: 6.97 GB, Total: 145.46 GB, NTFS

Game Information
----------------
      CD Key Valid: True
    Installed Mods: bf2, fh2, pr, xpack
       Current Mod: pr
       BF2 Version: BF2 1.5
        PR Version: 1.0.36.0
          Language: english
   Debug Available: False
     Large Address: False
Supported Hardware: None

Profile Information
-------------------
      Profile 0001: moSinaGant
              Type: Online
 Last Used Profile: True
        View Intro: False
        Fullscreen: False
      Display Mode: 1280x1024@60Hz
Display Mode Valid: True
   Graphics Scheme: Custom
     Multisampling: 2x
             VSync: True
   Terrain Quality: Low
   Effects Quality: Low
  Geometry Quality: Low
   Texture Quality: Low
  Lighting Quality: Low
   Dynamic Shadows: Off
    Dynamic Lights: Off
 Texture Filtering: Low
    Audio Provider: Software
    Provider Valid: True
     Audio Quality: Medium
               EAX: True

[Narrowlight]

Wow something actually worked

Code: Select all

Try running PR in windowed mode. 

worked for me too thanks mOsInNaGaNt, not my preferred way but I can live with it, hopefully someone can now find out why mumble crashes in full screen but works OK in windowed mode for some of us at least???????

[axised]

Code: Select all

Try running PR in windowed mode. 

poorly doenst work for me :/ Still keeps saying

which is german and says like narrowlight posted before

[12:00:35] Project Reality: BF2 lost link.
[12:00:36] You were suppressed.
[12:00:55] Project Reality: BF2 linked.
[12:00:56] You were unsuppressed.

any more ideas? im dispairing...

[axised]

#up

still got the same problem - i also tried to reinstall bf2 + pr, without success. This is what mumble keeps saying exactly:

[17:08:10] You were unsuppressed.
[17:08:54] Project Reality: BF2 lost link.
[17:08:54] You were suppressed.
[17:08:54] Project Reality: BF2 linked.
[17:08:55] You were unsuppressed.
[17:09:10] Project Reality: BF2 lost link.
[17:09:10] You were suppressed.
[17:09:18] Project Reality: BF2 linked.
[17:09:19] You were unsuppressed.
[17:11:49] Project Reality: BF2 lost link.
[17:11:49] You were suppressed.
[17:11:50] Project Reality: BF2 linked.
[17:11:51] You were unsuppressed.

[FelipeFR]

Thanks mOsInNaGaNt, nice and simple idea someone should have though of already. There's also programs that force "false" fullscreen mode in windows (aka remove borders and etc), which would provide for a seamlessly "normal" PR experience. Also, it has the added bonus of letting you screw around while the game loads with no problems. I'm gonna try it out, gonna report back soon.

[axised]

I'm gonna try it out, gonna report back soon.

if that works for you, i realy dont know, why this way solves the problems for everyone, not for me

its so frustrating ....

[LITOralis.nMd]

Thanks for answer Litoralis but keep in mind narrow and i got windows XP, not win7

I still got these problems, really anoying. still found no solution to solve the issue exept minimizing PR every minute to reenable mumble which is totally anoying...

Some other ideas? Thank you very much

greetings ax

At this point I'll need to see the System specs info...
Open PRLauncher, click Support->Copy to Clipboard button-> then paste it in this thread.

If you know how to find the audio chipset on your board, post that info and the driver number in this thread too.

[axised]

Code: Select all

System Information
------------------
  Operating System: Microsoft Windows XP Professional (5.1.2600)
          Language: German (Germany)
       Motherboard: Dell Inc.           0J3492
         Processor:               Intel(R) Pentium(R) 4 CPU 3.40GHz (Physical: 1, Logical: 1)
            Memory: 2,00 GB
      DIMM Modules: CHANNEL A DIMM 0: 1024,00 MB @ 400 MHz
                    CHANNEL B DIMM 0: 256,00 MB @ 400 MHz
                    CHANNEL A DIMM 1: 256,00 MB @ 400 MHz
                    CHANNEL B DIMM 1: 512,00 MB @ 400 MHz
         Page File: 1,00 GB
    .NET Framework: 4.0

Display Information
-------------------
 Display Device(s): Plug und Play-Monitor on NVIDIA GeForce 9600 GT
   Display Mode(s): 1280 x 1024 (32 bit) @ 75 Hz
    Driver Version: 6.14.13.2723 (327.23)
    Display Memory: 1024,00 MB
     Multisampling: 2, 4, 8
               DPI: 96 (100%)

Audio Information
-----------------
  Primary Playback: SoundMAX Digital Audio
 Primary Recording: SoundMAX Digital Audio
               EAX: True
           EAX 1.0: False
           EAX 2.0: True
           EAX 3.0: False
           EAX 4.0: False
           EAX 5.0: False
             X-RAM: False

Disk Information
----------------
      Install Path: C:\Programme\EA GAMES\Battlefield 2
                    Free: 23,58 GB, Total: 229,24 GB, NTFS
          Mod Path: C:\Programme\EA GAMES\Battlefield 2\mods\pr
                    Free: 23,58 GB, Total: 229,24 GB, NTFS
     Profiles Path: C:\Dokumente und Einstellungen\Martin\Eigene Dateien\ProjectReality\Profiles
                    Free: 23,58 GB, Total: 229,24 GB, NTFS
    Update DL Path: C:\Dokumente und Einstellungen\Martin\Lokale Einstellungen\Anwendungsdaten\Project Reality\Project Reality BF2\Downloads
                    Free: 23,58 GB, Total: 229,24 GB, NTFS
   Update Log Path: C:\Dokumente und Einstellungen\Martin\Lokale Einstellungen\Anwendungsdaten\Project Reality\Project Reality BF2\UpdateLogs
                    Free: 23,58 GB, Total: 229,24 GB, NTFS

Game Information
----------------
      CD Key Valid: True
    Installed Mods: bf2, pr, xpack
       Current Mod: pr
       BF2 Version: BF2 1.5
        PR Version: 1.0.36.0
          Language: english
   Debug Available: False
     Large Address: True
Supported Hardware: None

Profile Information
-------------------
      Profile 0001: DIIAS=axised
              Type: Online
 Last Used Profile: True
        View Intro: False
        Fullscreen: False
      Display Mode: 1024x768@60Hz
Display Mode Valid: True
   Graphics Scheme: Custom
     Multisampling: Off
             VSync: False
   Terrain Quality: Low
   Effects Quality: Low
  Geometry Quality: Low
   Texture Quality: Low
  Lighting Quality: Low
   Dynamic Shadows: Off
    Dynamic Lights: Off
 Texture Filtering: Low
    Audio Provider: Software
    Provider Valid: True
     Audio Quality: Low
               EAX: True

Ill look for audio chip and driver tomorrow, im on notebook at the moment.

I also tried turning view distance to 50% without success.
maybe i got to less memory?

[LITOralis.nMd]

maybe i got to less memory?
Yes, that is a problem.

You need to learn how to shut down as many background processes as possible.
You can use a program called GameBooster to automate shutting down programs.

[axised]

Yes, that is a problem.

if this really is the problem, i gonna buy some new memory. The fact that my computer is very old was the reason why i didnt bought any new memory yet.

[axised]

some news incoming...

first of all i tried gamebooster without success.

as running in windowed mode also doesnt work i tried to lower the viewing distance. at this point i figured out, that i couldnt lower it (to the recommended 70%). If i lower it, hit apply, close the options and reopen them again its switched back to 100%. couldnt get it lower.

at this point i was that frustrated that i decided to reinstall my whole windows including formatting hard disc.
After setting up BF2 incl. every patch to 1.5 again i reinstalled Project Reality.
Then a problem apeared which i almost forgot: Updating from 1.029 to 1.036 caused the "1212 Error", so i had to update it manually (source: https://www.realitymod.com/forum/f27-pr ... 2-a-5.html)

Once you install the 1.0.32.0_to_1.0.33.0 patch, you should be able to use the PRLauncher's updater to install the patches below

Didnt work for me, i had to update it up to 1.036 manually. Might there be a connection between those problems?

End of the story: after spending hours for backup, formating, reinstalling windows xp, setting up all drivers to newest version i still have the same supression-issues as before...

Id be incredibly thankfull if theres a solution for that problem :/

greetings

[mOsInNaGaNt]

Well, Ive recently gone to windows 7 and the problem has returned to me. Running in windowed mode ( which worked for me before ) no longer works. I dont have the understanding of this stuff to try anything else. Anyone got anymore ideas ? ?

[mOsInNaGaNt]

Now mumble doesn't start at all .. I get some yellow and blue text on the lower left corner of my screen that never goes away .. Anyone have a clue what the hell is going on here ??

[LITOralis.nMd]

Do you have any other version of mumble installed, including the old PRMumble 1.0.0.4Beta?
If you do, I suggest uninstalling those.

I'm not really sure what else to say.

[mOsInNaGaNt]

No other version of mumble installed. I dont know anything else to try either. Appreciate you taking the time to help. Sadly, I think im gonna have to retire pr for a while. Looking forward to pr 2 though

[LITOralis.nMd]

If you go to C:\Users\[USERNAME]\AppData\Roaming\Mumble
and open the console.txt file, scroll to the bottom and copy and paste the last 40 or so lines here, we might be able to see the error message, which could help us find the root cause of this.

[mOsInNaGaNt]

Console.txt


<W>2014-01-21 23:13:11.138 DirectSound: Disabled as WASAPI is available
<W>2014-01-21 23:13:11.258 CELT bitstream 8000000b from C:/Program Files/Steam/SteamApps/common/Battlefield 2/mods/pr/bin/PRMumble/celt0.0.7.0.dll
<W>2014-01-21 23:13:11.381 CELT bitstream 80000010 from C:/Program Files/Steam/SteamApps/common/Battlefield 2/mods/pr/bin/PRMumble/celt0.0.11.0.dll
<W>2014-01-21 23:13:11.407 Locale is "en_US" (System: "en_US")
<W>2014-01-21 23:13:11.439 TextToSpeechPrivate: Failed to allocate TTS Voice
<W>2014-01-21 23:13:11.948 Database SQLite: "3.7.7.1"
<W>2014-01-21 23:13:11.948 Overlay mumble_ol.dll failed to load
<W>2014-01-21 23:13:11.951 Overlay: Listening on "\\.\pipe\MumbleOverlayPipe"
<W>2014-01-21 23:13:13.732 GlobalShortcutWin: No LowLevelHooksTimeout registry key found.
<W>2014-01-21 23:13:13.819 QMetaObject::invokeMethod: No such method MainWindow::setupView(bool)
<W>2014-01-21 23:13:13.819 QMetaObject::invokeMethod: No such method MainWindow::activateWindow()
<W>2014-01-21 23:13:13.942 AudioInput: 8000 bits/s, 48000 hz, 480 sample
<W>2014-01-21 23:13:14.151 Adding device {6f1d2b60-d5a0-11cf-bfc7-444553540000} Mouse Mouse:8
<W>2014-01-21 23:13:14.153 Adding device {6f1d2b61-d5a0-11cf-bfc7-444553540000} Keyboard Keyboard:127
<W>2014-01-21 23:13:14.164 Adding device {0ce96f80-7d44-11e3-8001-444553540000} Logitech Rumblepad 2 USB Logitech Rumblepad 2 USB:12
<W>2014-01-21 23:13:14.293 Adding device {3183a8c0-4f8a-11e3-8001-444553540000} G500s Laser Gaming Mouse G500s Laser Gaming Mouse:652
<W>2014-01-21 23:13:14.362 WASAPIInput: Latencies 100000 30000 => 100000
<W>2014-01-21 23:13:14.525 WASAPIOutput: Latencies 100000 30000 => 100000
<W>2014-01-21 23:13:14.697 Adding device {31872b30-4f8a-11e3-8004-444553540000} USB Keyboard USB Keyboard:1
<W>2014-01-21 23:13:14.811 Adding device {3187a060-4f8a-11e3-8005-444553540000} USB Keyboard USB Keyboard:3
<W>2014-01-21 23:13:14.923 Adding device {3187c770-4f8a-11e3-8006-444553540000} USB Keyboard USB Keyboard:21
<W>2014-01-21 23:13:14.939 Adding device {02d0e5a0-4f8b-11e3-8008-444553540000} Saitek Pro Flight Yoke Saitek Pro Flight Yoke:23
<W>2014-01-21 23:13:15.042 WASAPIInput: Stream Latency 53333 (960)
<W>2014-01-21 23:13:15.044 AudioInput: Initialized mixer for 2 channel 48000 hz mic and 0 channel 48000 hz echo
<W>2014-01-21 23:13:15.044 WASAPIOutput: Stream Latency 116100 (1323)
<W>2014-01-21 23:13:15.044 WASAPIOutput: Periods 10000us 3000us (latency 11610us)
<W>2014-01-21 23:13:15.044 WASAPIOutput: Buffer is 30000us (1)
<W>2014-01-21 23:13:15.045 AudioOutput: Initialized 2 channel 44100 hz mixer
<W>2014-01-21 23:34:01.047 DirectSound: Disabled as WASAPI is available
<W>2014-01-21 23:34:01.052 CELT bitstream 8000000b from C:/Program Files/Steam/SteamApps/common/Battlefield 2/mods/pr/bin/PRMumble/celt0.0.7.0.dll
<W>2014-01-21 23:34:01.055 CELT bitstream 80000010 from C:/Program Files/Steam/SteamApps/common/Battlefield 2/mods/pr/bin/PRMumble/celt0.0.11.0.dll
<W>2014-01-21 23:34:01.056 Locale is "en_US" (System: "en_US")
<W>2014-01-21 23:34:01.066 TextToSpeechPrivate: Failed to allocate TTS Voice
<W>2014-01-21 23:34:01.234 Database SQLite: "3.7.7.1"
<W>2014-01-21 23:34:01.235 Overlay mumble_ol.dll failed to load
<W>2014-01-21 23:34:01.235 Overlay: Listening on "\\.\pipe\MumbleOverlayPipe"
<W>2014-01-21 23:34:01.578 QMetaObject::invokeMethod: No such method MainWindow::setupView(bool)
<W>2014-01-21 23:34:01.579 QMetaObject::invokeMethod: No such method MainWindow::activateWindow()
<W>2014-01-21 23:34:01.589 AudioInput: 8000 bits/s, 48000 hz, 480 sample
<W>2014-01-21 23:34:01.675 GlobalShortcutWin: No LowLevelHooksTimeout registry key found.
<W>2014-01-21 23:34:01.699 WASAPIInput: Latencies 100000 30000 => 100000
<W>2014-01-21 23:34:01.731 WASAPIOutput: Latencies 100000 30000 => 100000
<W>2014-01-21 23:34:01.735 Adding device {6f1d2b60-d5a0-11cf-bfc7-444553540000} Mouse Mouse:8
<W>2014-01-21 23:34:01.737 Adding device {6f1d2b61-d5a0-11cf-bfc7-444553540000} Keyboard Keyboard:127
<W>2014-01-21 23:34:01.743 Adding device {0ce96f80-7d44-11e3-8001-444553540000} Logitech Rumblepad 2 USB Logitech Rumblepad 2 USB:12
<W>2014-01-21 23:34:01.808 Adding device {3183a8c0-4f8a-11e3-8001-444553540000} G500s Laser Gaming Mouse G500s Laser Gaming Mouse:652
<W>2014-01-21 23:34:01.824 WASAPIInput: Stream Latency 53333 (960)
<W>2014-01-21 23:34:01.830 WASAPIOutput: Stream Latency 116100 (1323)
<W>2014-01-21 23:34:01.830 WASAPIOutput: Periods 10000us 3000us (latency 11610us)
<W>2014-01-21 23:34:01.830 WASAPIOutput: Buffer is 30000us (1)
<W>2014-01-21 23:34:01.831 AudioInput: Initialized mixer for 2 channel 48000 hz mic and 0 channel 48000 hz echo
<W>2014-01-21 23:34:01.831 AudioOutput: Initialized 2 channel 44100 hz mixer
<W>2014-01-21 23:34:01.891 Adding device {31872b30-4f8a-11e3-8004-444553540000} USB Keyboard USB Keyboard:1
<W>2014-01-21 23:34:01.914 Adding device {3187a060-4f8a-11e3-8005-444553540000} USB Keyboard USB Keyboard:3
<W>2014-01-21 23:34:01.938 Adding device {3187c770-4f8a-11e3-8006-444553540000} USB Keyboard USB Keyboard:21
<W>2014-01-21 23:34:01.950 Adding device {02d0e5a0-4f8b-11e3-8008-444553540000} Saitek Pro Flight Yoke Saitek Pro Flight Yoke:23

[LITOralis.nMd]

<W>2014-01-21 23:34:01.066 TextToSpeechPrivate: Failed to allocate TTS Voice

That is bad. I don't know if it's the cause of the disconnects, but let's fix it and see what happens.


Start PRmumble.
COnfigure->Settings
Tick the "Advanced tickbox on bottom left in picture below.
then do this:

Then shutdown and restart PR and PRMumble to test.
Play for a while or until PRMumble disconnects again.
GO back to your log and see if that error message still occurs.
Let me know.

Source of this code:
https://github.com/mumble-voip/mumble/b ... ch_win.cpp

[mOsInNaGaNt]

Mumble managed to start up this time but it still loses link and suppresses every minute or so.

Regarding the (<W>2014-01-24 22:18:50.400 TextToSpeechPrivate: Failed to allocate TTS Voice) error, "Read Back own messages" was already disabled by default .. But I did select it for testing purposes but there wasn't any change. I still get the error message in the console.txt.

I did notice this. Not sure what it means though.

<W>2014-01-24 22:18:46.544 ServerHandler: Failed to remove UDP from QoS

Thanks

Also, Is there a log that shows whats going on when mumble is running? .. and not just when it starts up.

[LITOralis.nMd]

I get disconnected from the server as soon as I connect.

This can be due to a version mismatch between the server and the client. Ask the server owner about the version that its being used, and get that version.
This can also occur with some home routers if they are unable to handle QoS (Quality Of Service) being set on the packets. This can be disabled in mumble in the "Network" tab; you will need to check the "Advanced" checkbox to see this.

source: FAQ/English - Mumble.

So I'm not sure if you've tried this yet. There is two ways to go about testing this:
1. Turn on QoS on your router. Test
1a. or Turn off QoS on your router. Test.

2. Start PRmumble.
COnfigure->Settings
Tick the "Advanced tickbox on bottom left in picture below.
then Click Network on the left colum, then UNTICK the 'Use Quality of Service' tickbox.
Then click APPLY.
Test.

Which router do you have?