Error 1301

[LITOralis.nMd]

That is interesting Sam,
may I ask if you are located in Iran?

This might be ICT enforced blocking at a backbone level?

[SAM609]

That is interesting Sam,
may I ask if you are located in Iran?

This might be ICT enforced blocking at a backbone level?

Yes I am ! and it can be Government's internet blocking program ! after all over 90 percent of internet is blocked in here ! ??:
or it just can be the dysfunctional DNS server that I was using !

[Daniel]

I get this problem too, BUT the problem might be caused by my setup.

My PR pc is connected via LAN cable to my Laptop, which is connected to the WiFi router (via WLAN)...

What setting do I have to change to fix this error? (BF3 for example works fine!!!)

[Daniel]

UPDATE: FIXED!!!

Do NOT know EXACTLY what fixed it, but it seems it was one of the following steps:

1. Made sure that windows firewall on my Win 8 notebook and my Win 7 PR-PC is NOT blocking ANY "PR..." stuff and Punkbuster AT ALL

2. Made sure AVG (free antivirus) would EXclude any "PR..." stuff (the .exe)

3. DISABLED TCP/IP 6 on my PC and Notebook network adapters

4. Restarted PC and Laptop.

[[MER]Gunslinger]

Funnily enough I had this issue and couldn't get anything to work. Then I accidentally stumbled on a fix. Instead of clicking on the PR icon on my desktop (which I now realise was out of date), I went through my start menu and ran it up from there. Worked first time. I know.....epic n00b fail!

[Dude_Nukem]

Gunslinger;1973188']Funnily enough I had this issue and couldn't get anything to work. Then I accidentally stumbled on a fix. Instead of clicking on the PR icon on my desktop (which I now realise was out of date), I went through my start menu and ran it up from there. Worked first time. I know.....epic n00b fail!

That did the job for me aswell!

Thanks for the tip! Such a pracital solution. Hopefully it works out for others.

Strange error though . Changed nothing. PR worked smooth for months and all of the sudden this error appears. The *******.

[Tyso3]

Hey guys. Been playing for years but just had this issue too.


Noticed it when came back from weekend away. PR had not changed one bit as far i could see but got the 1301 verification error when trying to play.

Tried the above suggestion, tried uninstalling PR/BF2 compeltely etc etc all of it didnt work.


As a last ditch i turned my Firewall off. Ran it, this time it detected a small PR update (All PR exes are allowed through my firewall). It updated and ran fine!.

I then re-enabled my firewall and booted it up fine.


Sounds so simple, but hope this helps others.

[wanted31]

- Go to Network and Sharing center
- Change Adapter settings
- Press your right mouse button on local area Connection ( your network )
- Go to properties
- Press on Internet Protocol Version 4 (TCP/IPv4 )
- Go to properties
- change from '' Obtain DNS server address automatically''
- to '' Use the following DNS server addresses ''
- and enter there 8.8.4.4


This worked for me.

win 7 64bit

[sdcapazzo]

I'm having the same problem and I can not play the game.

[-Evers-]

Hello, I have the same problem, but in new patch 1.3. What I can do?

System Information
------------------
Operating System: Microsoft Windows 7 Home Premium (6.1.7600)
Architecture: 64-bit
Current Culture: Polish (Poland)
Motherboard: MICRO-STAR INTERNATIONAL CO.,LTD P45-C51 (MS-7519)
Processor: Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz (Physical: 2, Logical: 2)
Memory: 4,00 GB
Page File: 4,00 GB
.NET Framework: 4.5, Runtime: 4.0.30319.17929

Display Information
-------------------
Display Device(s): SyncMaster 2032BW/2032GW,SyncMaster Magic CX2032GW(Digital) on NVIDIA GeForce GTX 460
Display Mode(s): 1680 x 1050 (32 bit) @ 60 Hz
Driver Version: 9.18.13.4411 (344.11)
Display Memory: 1024,00 MB
Multisampling: 2, 4, 8
DPI: 96 (100%)

Audio Information
-----------------
Primary Playback: Słuchawki (2 ? Razer Kraken USB
Primary Recording: Mikrofon (2 ? Razer Kraken USB)
Open AL Renderer: Software
EAX: True
EAX 1.0: False
EAX 2.0: True
EAX 3.0: False
EAX 4.0: False
EAX 5.0: False
X-RAM: False

Disk Information
----------------
Install Path: d:\Project Reality\Project Reality BF2
Free: 694,33 GB, Total: 823,99 GB, FS: NTFS, SSD: False
Mod Path: d:\Project Reality\Project Reality BF2\mods\pr
Free: 694,33 GB, Total: 823,99 GB, FS: NTFS, SSD: False
Profiles Path: C:\Users\Evers\Documents\ProjectReality\Profiles
Free: 33,11 GB, Total: 107,42 GB, FS: NTFS, SSD: False
Update DL Path: C:\Users\Evers\AppData\Local\Project Reality\Project Reality BF2\Downloads
Free: 33,11 GB, Total: 107,42 GB, FS: NTFS, SSD: False
Update Log Path: C:\Users\Evers\AppData\Local\Project Reality\Project Reality BF2\UpdateLogs
Free: 33,11 GB, Total: 107,42 GB, FS: NTFS, SSD: False

Game Information
----------------
Installed Mods: pr
Current Mod: pr
Version: Standalone - 1.0
PR Version: 1.3.0.0
Language: polish
Debug Available: False
Large Address: True
Supported Hardware: None

Profile Information
-------------------
Profile 0001: [QRT]Evers
Type: Online
View Intro: True
Fullscreen: True
Display Mode: 1680x1050@60Hz
Display Mode Valid: True
Graphics Scheme: Medium
Multisampling: Off
VSync: False
Terrain Quality: Low
Effects Quality: Medium
Geometry Quality: Low
Texture Quality: Medium
Lighting Quality: Low
Dynamic Shadows: Medium
Dynamic Lights: Medium
Texture Filtering: Medium
Audio Provider: Software
Provider Valid: True
Audio Quality: Medium
EAX: True

Profile 0002: [HST]-Evers-
Type: Online
Last Used Profile: True
View Intro: True
Fullscreen: True
Display Mode: 1680x1050@60Hz
Display Mode Valid: True
Graphics Scheme: Medium
Multisampling: Off
VSync: False
Terrain Quality: Low
Effects Quality: Medium
Geometry Quality: Low
Texture Quality: Medium
Lighting Quality: Low
Dynamic Shadows: Medium
Dynamic Lights: Medium
Texture Filtering: Medium
Audio Provider: Software
Provider Valid: True
Audio Quality: Medium
EAX: True

[Daniel]

You tried all of my steps above?

[LITOralis.nMd]

Unplug, or completely disable your Razer audio software.


Primary Playback: Headphones (Razer Kraken USB)
Primary Recording: Microphone (Razer Kraken USB)

[napstrike]

Dear friends;
If you are getting this error because of your IPv6 settings, DO NOT DISABLE IPV6. Some web sites, including this site can not be accessed if you disable it. There is another, much better fix on Microsoft's site:

https://support.microsoft.com/en-us/kb/2533454

Select "Prefer IPv4 over IPv6" from the link, and run the setup, then restart your PC when it asks you to do so.

How it works:
Windows 8 prefers IPv6 over the IPv4 by default. If you make it prefer IPv4 over the other, PR will launch without any problem, and you will still be able to view sites that use IPv6.

[Vertizy]

Ive tried it ll but it still doesnt work..

[Softy]

Went to play today and got this error. Looked up a few posts and solutions but nothing has worked. Anyone got a hot fix?
Win 7 ultimate
Yesterday I did run a adware / junk removed program , didn't play PR after that but I did notice this morning I had to turn my internet adapter back on , not sure if this is related or not.



Code:

System Information
------------------
Operating System: Microsoft Windows 7 Ultimate (6.1.7601)
Architecture: 32-bit
Current Culture: English (United States)
Motherboard: ECS G31T-M7
Processor: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz (Physical: 2, Logical: 2)
Memory: 4.00 GB
Page File: 3.25 GB
.NET Framework: 4.5.1, Runtime: 4.0.30319.18444

Display Information
-------------------
Display Device(s): Generic PnP Monitor on NVIDIA GeForce GTX 460 SE
Display Mode(s): 1920 x 1200 (32 bit) @ 59 Hz
Driver Version: 9.18.13.4752 (347.52)
Display Memory: 1024.00 MB
Multisampling: 2, 4, 8
DPI: 120 (125%)

Audio Information
-----------------
Primary Playback: Speakers (High Definition Audio
Primary Recording: Microphone (High Definition Aud
Open AL Renderer: Software
EAX: True
EAX 1.0: False
EAX 2.0: True
EAX 3.0: False
EAX 4.0: False
EAX 5.0: False
X-RAM: False

Disk Information
----------------
Install Path: C:\Program Files\Project Reality\Project Reality BF2
Free: 72.67 GB, Total: 144.29 GB, FS: NTFS, SSD: False
Mod Path: C:\Program Files\Project Reality\Project Reality BF2\mods\pr
Free: 72.67 GB, Total: 144.29 GB, FS: NTFS, SSD: False
Profiles Path: C:\Users\Vinny\Documents\ProjectReality\Profiles
Free: 72.67 GB, Total: 144.29 GB, FS: NTFS, SSD: False
Update DL Path: C:\Users\Vinny\AppData\Local\Project Reality\Project Reality BF2\Downloads
Free: 72.67 GB, Total: 144.29 GB, FS: NTFS, SSD: False
Update Log Path: C:\Users\Vinny\AppData\Local\Project Reality\Project Reality BF2\UpdateLogs
Free: 72.67 GB, Total: 144.29 GB, FS: NTFS, SSD: False

Game Information
----------------
Installed Mods: pr
Current Mod: pr
Version: 1.3.1.0
PR Version: 1.3.1.0
Language: english
Debug Available: False
Large Address: False
Supported Hardware: None

Profile Information
-------------------
Profile 0001: =]H[=SOFTY
Type: Online
Last Used Profile: True
View Intro: False
Fullscreen: True
Display Mode: 1920x1200@60Hz
Display Mode Valid: True
Graphics Scheme: Custom
Multisampling: Off
VSync: False
Terrain Quality: Low
Effects Quality: High
Geometry Quality: Low
Texture Quality: Medium
Lighting Quality: Low
Dynamic Shadows: Off
Dynamic Lights: Medium
Texture Filtering: Medium
Audio Provider: Hardware
Provider Valid: True
Audio Quality: Medium
EAX: True

[Softy]

Dear friends;
If you are getting this error because of your IPv6 settings, DO NOT DISABLE IPV6. Some web sites, including this site can not be accessed if you disable it. There is another, much better fix on Microsoft's site:

https://support.microsoft.com/en-us/kb/2533454

Select "Prefer IPv4 over IPv6" from the link, and run the setup, then restart your PC when it asks you to do so.

How it works:
Windows 8 prefers IPv6 over the IPv4 by default. If you make it prefer IPv4 over the other, PR will launch without any problem, and you will still be able to view sites that use IPv6.

Tried this , still didn't work.

[Hooch]

Another one to the error 1301. I can't seem to get this working. I've tried all that was recommended and tried opening that hash file but couldn't. Someone help please?

[YAK-R]

Well i'm temporarily visiting the US with a laptop, i ran into this problem after trying to install PR

I tried changing DNS, opening ports, running the process monitor, etc

What fixed it for me was disabling IPv6 on my network adapter.


Cheers!

[SANGUE-RUIM]

guys, try this:

https://www.realitymod.com/forum/f10-pr ... ost2103258

[jimaras1997]

i have download 1.3.5 and when i check for updates it sents me error 1311 plz help