[Vehicle] NH-90 [WIP]

HangMan_ · Post by **HangMan_** » 2010-02-25 08:31

Ok so i discovered that i have an old version of the mesh. Currently no rotors or wheels. It is in .dwf format (which means nothing to me) so aparently its semi exported or something. Either way at least i have a copy of it. It looks like the main interior is complete on it.

Gunner_downer · Post by **Gunner_downer** » 2010-02-25 08:45

I guess that will have to do but let's still hope Pick up contacts us.

HangMan_ · Post by **HangMan_** » 2010-02-25 08:49

Just sent him two pm's on two different forums. Now all we can do is wait....

Durkie · Post by **Durkie** » 2010-02-25 14:29

.dwf is a format used at Autodesk that you can use in different programs of Autodesk you should be able to load it into 3ds max

HangMan_ · Post by **HangMan_** » 2010-02-26 03:29

Today PiCkUp gave me the files for the NH-90. I am now talking to him about getting one of my modelers to complete the model

Gunner_downer · Post by **Gunner_downer** » 2010-02-26 05:55

Great news

HangMan_ · Post by **HangMan_** » 2010-02-26 08:48

These pictures a courtesy of our modeler Frenzy who i asked to take a look at the model.

Post by **Amok@ndy** » 2010-02-26 10:12

the rotors look a lil bit small

are the propotions correct ?

sylent/shooter · Post by **sylent/shooter** » 2010-02-26 11:23

Amok thats what I was thinking.. there is no way those small rotors could lift that unless they were spinning at really high RPM and it was aluminum

cid228 · Post by **cid228** » 2010-02-26 12:31

Nice start !
Could we get some renders with smoothing turned off ? It looks a little bit too round right now, mainly because the top part and the break on the side is not more distinct.
The back wing is a little bit too short. And the rotors would make it a dodo

Keep it up, looking forward to updates !

Here are a few pics for ref comparison ...

Post by **Rhino** » 2010-02-26 16:01

Looks like there are loads of smoothing errors and a few modelling errors too that really need to be cleaned up.

sylent/shooter wrote:Amok thats what I was thinking.. there is no way those small rotors could lift that unless they were spinning at really high RPM and it was aluminum

ye the rotors seem way too small and that's even when comparing it with the ref.

HangMan_ · Post by **HangMan_** » 2010-02-26 23:33

I've talked to motherdear and he thinks this is a post export model. Hence why there are some smoothing errors aparently. I am currently trying to get the exported version of pickup..

frenzy · Post by **frenzy** » 2010-02-27 00:00

Whoops, my bad on the rotor size.

The rotor meshes came in seperate files, and I didnt realise the wernt in proportion.

Post by **Amok@ndy** » 2010-02-27 00:06

frenzy wrote:Whoops, my bad on the rotor size.

The rotor meshes came in seperate files, and I didnt realise the wernt in proportion.

now he looks like a kiwi or how was the bird called with the small wings ?

sylent/shooter · Post by **sylent/shooter** » 2010-02-27 00:30

dodo bird... they couldn't fly and were incredibly stupid XD

rampo · Post by **rampo** » 2010-02-27 00:30

The Irony is overwhelming

Redamare · Post by **Redamare** » 2010-02-27 00:40

thats pretty cool

lol ... i like it alot good work

HangMan_ · Post by **HangMan_** » 2010-02-27 22:15

We are going to start working on getting those rotors proportioned right as soon as we decide which nzdf modeler wants to take this project on.

sylent/shooter · Post by **sylent/shooter** » 2010-02-28 16:37

if I knew how I would but sadly I don't..

UberWazuSoldier · Post by **UberWazuSoldier** » 2010-03-02 05:58

The rotor would be a separate model, right? In that case it's a nice and easy job, maybe I'll do it if nobody else will.

[Vehicle] NH-90 [WIP]

Re: [Vehicle] NH-90 [WIP]

Re: [Vehicle] NH-90 [WIP]

Re: [Vehicle] NH-90 [WIP]

Re: [Vehicle] NH-90 [WIP]

Re: [Vehicle] NH-90 [WIP]

Re: [Vehicle] NH-90 [WIP]

Re: [Vehicle] NH-90 [WIP]

Re: [Vehicle] NH-90 [WIP]

Re: [Vehicle] NH-90 [WIP]

Re: [Vehicle] NH-90 [WIP]

Re: [Vehicle] NH-90 [WIP]

Re: [Vehicle] NH-90 [WIP]

Re: [Vehicle] NH-90 [WIP]

Re: [Vehicle] NH-90 [WIP]

Re: [Vehicle] NH-90 [WIP]

Re: [Vehicle] NH-90 [WIP]

Re: [Vehicle] NH-90 [WIP]

Re: [Vehicle] NH-90 [WIP]

Re: [Vehicle] NH-90 [WIP]

Re: [Vehicle] NH-90 [WIP]