[Weapon] H&K HK417

NemeanHavoc · Post by **NemeanHavoc** » 2008-03-02 13:11

To clear thinks a bit up, KCT does use HK417.
most peaple have seen them in Delft as well.

Check it out:

Note the sniper.

Here you can see it clearly:

Thoes are not C8's

KP · Post by KP » 2008-03-02 14:09

Roger. Katarn has confirmed that I can use the PR M16 as a basis for the 417. I'll probably get it in a couple of days.

Post by **Glimmerman** » 2008-03-02 15:29

OK thats great news

[uBp]Irish · Post by **[uBp]Irish** » 2008-03-02 19:32

i dont care what bob says, those rails make it look smexy.

Celica` · Post by **Celica`** » 2008-03-02 21:44

NemeanHavoc wrote:To clear thinks a bit up, KCT does use HK417.
most peaple have seen them in Delft as well.

Check it out:

Note the sniper.

Here you can see it clearly:

Thoes are not C8's

We know, my military info is always correct.
Atleast the Army info.

Post by **Glimmerman** » 2008-03-03 08:59

btw the new Diemaco rifles we will get also have those rails, perhaps its something we can take in mind for our models?

NemeanHavoc · Post by **NemeanHavoc** » 2008-03-08 17:04

Celica` wrote:We know, my military info is always correct.
Atleast the Army info.

I noticed, but you are not the only one in the army

.

Celica` · Post by **Celica`** » 2008-03-08 18:52

Ah! A colleague?
What do you do for Defensie?

Jantje|NL^ · Post by **Jantje|NL^** » 2008-03-08 20:02

Celica` wrote:Ah! A colleague?

I pay tax.

am I a colleague as well?

KP · Post by KP » 2008-03-08 21:22

All right, got my hands on the M4, starting work on it now.

Jantje|NL^ · Post by **Jantje|NL^** » 2008-03-09 12:20

brummy.uk wrote:Can't wait to see this gun in-game

The bad thing is..

you have to..

will we all survive this?! :')

NemeanHavoc · Post by **NemeanHavoc** » 2008-03-09 12:26

Celica` wrote:Ah! A colleague?
What do you do for Defensie?

Almost finished my AMO, after that 11tank..

Post by **Glimmerman** » 2008-03-10 08:06

KP wrote:All right, got my hands on the M4, starting work on it now.

We are anxious to see what you will cook up for us KP

KP · Post by KP » 2008-03-10 20:07

Quick WIP:

As you can see, it still needs lots of work. The butt is the one off the M4, it needs a new mag-well, a new mag, more work on the front handguard and any attachments. Plus the upper part of the reciever needs to be attached to the lower part. I had to rescale the upper reciever, because it seems that H&K have simply taken the lower bit from an M4 and slapped a FOGB 7.62 upper onto it.

Celica` · Post by **Celica`** » 2008-03-10 23:30

looking nice KP.

ps; have you taken a look at my rifle yet? the one sent you in .3ds

Fracsid · Post by **Fracsid** » 2008-03-11 02:52

The receiver on your 417 matches the 417 from the HKPro picture, but it doesn't seem to match any of the ones the Danes are using in the other reference pictures, because the slant on the mag well is different; maybe that was a prototype picture? It looks like it's from back when the 417 was going to take G3 magazines.

Maxfragg · Post by **Maxfragg** » 2008-03-11 06:08

i think it should get the PSD-1 styled gripp, as it is issued with the marksman variants

KP · Post by KP » 2008-03-11 06:26

Celica` wrote:looking nice KP.

ps; have you taken a look at my rifle yet? the one sent you in .3ds

Yep, but forgot to PM you about it. No joy. The importer tools I could find don't work with 3ds max 9. Not that it matters now that we've got the PR version.

Fracsid wrote:The receiver on your 417 matches the 417 from the HKPro picture, but it doesn't seem to match any of the ones the Danes are using in the other reference pictures, because the slant on the mag well is different; maybe that was a prototype picture? It looks like it's from back when the 417 was going to take G3 magazines.

Correct, as I said, it needs a new mag-well.

Post by **Glimmerman** » 2008-03-11 11:35

Looking good KP

keep up the good work

Brummy · Post by **Brummy** » 2008-03-11 19:29

Nice!