[Weapon] AKM [WIP](SY)

[m111]

AKM, RPK, type56 and AK47 remake on the basis of original PR's AK47. Soon i will make Romanian and Yugoslavian versions
Link AK

[Mineral]

Nice work! but for next version of PR we already have a brand new AK model of much higher quality then PR's AK47 set.

[Insanitypays]

Awesome, but there are a couple minor issues I've noticed that I thought I'd bring up rq:

Nice work! but for next version of PR we already have a brand new AK model of much higher quality then PR's AK47 set.

It looks like there's something wrong with this polygon but it could just be lighting:

Looks like there's another one to the right a bit as well...

The wood furniture on AKs should have more of a smooth, reflective surface.

In most cases the wood is going to be battered and damaged a bit (some more than others), but not to the point at which the material is consistently rough.

[m111]

Nice work! but for next version of PR we already have a brand new AK model of much higher quality then PR's AK47 set.

i know about the new model. these weapons i made for myself until the release of the new version of PR

[m111]

Insanitypays;2063573']Awesome, but there are a couple minor issues I've noticed that I thought I'd bring up rq:
It looks like there's something wrong with this polygon but it could just be lighting:
http://www.mediafire.com/convkey/9958/y ... kevyzg.jpg
Looks like there's another one to the right a bit as well...

problem in smoothing but i did not correct it because i made for myself.

The wood furniture on AKs should have more of a smooth, reflective surface.
http://www.mediafire.com/convkey/0854/0 ... itwizg.jpg
In most cases the wood is going to be battered and damaged a bit (some more than others), but not to the point at which the material is consistently rough.

you're right. i'm likely to change the texture

[m111]

Romanian AKM

[Kalasznikow47]

Romanian AKM

Hey, great AK's! They definitely bring some life to my SP version of PR. Is Romanian pm. 63 finished and ready to download?

[ComradeHX]

Just sayingn

It's great that the barrel reinforcement bulge is finally added； and even the RPK rear sight!

But the receiver dimple is rectangular； Stamped receiver has rounded corners for dimple.

Also, you are still missing the lower handguard retaining lever.
And where gastube meets the gasblock, there should be a little gap , just put a line there.

Also, AKM needs proper laminated wooden handguard furniture.

Also, your selector positions' spacing is for AIRSOFT/STRIKEBALL

What you have now looks good, but it's just a little bit away from perfection（as far as engine can do）.

[fatalsushi83]

Do you sleep with your AK, Comrade, cause you seem to know it quite well?

[ComradeHX]

Do you sleep with your AK, Comrade, cause you seem to know it quite well?

Kind of.

Insanitypays;2063573']
The wood furniture on AKs should have more of a smooth, reflective surface.

In most cases the wood is going to be battered and damaged a bit (some more than others), but not to the point at which the material is consistently rough.

Those pictured AK are airsoft.

They are most likely LCT, which have incorrect selector switch notch spacing(and size/shape), incorrect finish(both metal and wood), laminated wood layer too thick, and pistol grip angle.

[m111]

Hey, great AK's! They definitely bring some life to my SP version of PR. Is Romanian pm. 63 finished and ready to download?

PR_AK

[m111]

Just sayingn

It's great that the barrel reinforcement bulge is finally added； and even the RPK rear sight!

But the receiver dimple is rectangular； Stamped receiver has rounded corners for dimple.

Also, you are still missing the lower handguard retaining lever.
And where gastube meets the gasblock, there should be a little gap , just put a line there.

Also, AKM needs proper laminated wooden handguard furniture.

Also, your selector positions' spacing is for AIRSOFT/STRIKEBALL

What you have now looks good, but it's just a little bit away from perfection（as far as engine can do）.

i've never seen airsoft weapons so i do not know the difference between airsoft and real weapons. i used real AKM, AK74, AKS74, AKS74U many years ago but never gazed at the detail because the weapon was just a tool of my work

[Portable.Cougar]

I don't know what it is, I just know the sound it makes when it takes a mans life.

The Romanian also may not have the mag dimple. Depends on what Romi your trying to duplicate.

Most of the AKs we see from the sand box right now are Chinese models. With a few Egyptian tossed in for good measure. Also Iraq was making knock off Chinese AK's in house before 'Merica kicked Sadam out.

[ComradeHX]

Also Iraq was making knock off Chinese AK's in house before 'Merica kicked Sadam out.

I thought Iraqi imported machinery/technology from Yugoslavia?

[BroCop]

They did and they still do.

[BroCop]

So it has come to this...