Page 1 of 1

[1.4.18] Bin folder/files issue

Posted: 2017-10-29 21:09
by Mats391
We got a couple of reports of players having issues with files or the complete mods/pr/bin folder getting lost during the update. Here we will try to help you resolve these issues without having to re-install everything.

1) Determining when/where the issue happened.
Did it happen during updating or after it was finished? For that check

Code: Select all

mods/pr/mod.desc
and see what it says under

Code: Select all

<version> 1.4.18.0 </version>
If it reads 1.4.18.0, you should be on the correct version already and something failed in restoring the bin folder.
If it reads 1.4.17.0, it failed during updating and you need restart the update.

2) Replacing files
First off: Make backups of everything you are about to replace
Based on what you determined before in step 1) you need to download the correct files.

2a) Updated 1.4.18.0
If your mod.desc reads 1.4.18.0 you need the files of the patched version. Pick the ones corresponding to your system:
1.4.18.0 x86
1.4.18.0 x64
2b) Failed during update (still on 1.4.17.0)
If you mod.desc reads 1.4.17.0 you need the files of the old version. Pick the ones corresponding to your system:
1.4.17.0 x86
1.4.17.0 x64


Folder permission issues
In addition to the missing bin folder/files, some users also report folder permissions getting messed up in such a way that they cannot replace the files. For that please try these steps.

1) Try turning your PC off and on again. Yes its cheesy, but it often works.
2) Make sure you run things as admin.
3) Try disabling your anti-virus.

Re: [1.4.18] Bin folder/files issue

Posted: 2017-10-31 21:05
by jamil_1234567891
What about the 1.4.19.0 version? Is there a download for that version?

Re: [1.4.18] Bin folder/files issue

Posted: 2017-10-31 23:23
by Suchar
You can download all manual patches so you don't have to do it every time when you need to reinstall PR (you have to just install them).

Full client for 1.4.20 or something would be a nice thing IMO.

Re: [1.4.18] Bin folder/files issue

Posted: 2017-11-02 16:48
by Mats391
jamil_1234567891 wrote:What about the 1.4.19.0 version? Is there a download for that version?
In 1.4.19 and 1.4.20 only Reality.Bf2.dll got changed. If only the PRLauncher.exe goes missing you can take that from the files linked above.
SucharMistrz wrote:You can download all manual patches so you don't have to do it every time when you need to reinstall PR (you have to just install them).

Full client for 1.4.20 or something would be a nice thing IMO.
We are looking into it.