Project Reality Forums

Greetings!

I encountered the following problem:

When I run PR shortcut, the PR logo appears, which freezes and then disappears. And the PR does not start.

The game was installed on a freshly installed Windows 7 x64.

During the installation of PR no errors occurred.
During the installation of Battlefield 2 warning appears that the game is tested only on Windows XP x32.
In the process of updating DirectX inevitably there was an error. Which I understand is the fact that Windows 7 is equipped by Direct X 11.


Tried to run the PR from the directory through pr.exe.
It did not help.

Tried to clear the profile folder BF2.
It did not help.

I have tried completely removing and reinstalling the BF2 and PR, removing Punkbuster. And at the end of the installation of PR refused to update Punkbuster.
Still does not work...

Tried to run the PR from the Community menu of BF2. The PR runs. However, after the logon screen, the PR is recommended run it through the pr.exe and not through bf2.exe

After that, the problem remains unsolved

So if you have any suggestions on how you can help me please write it here.

Best Regards, Stadtherz

same problem, same os

Have you tried to run PR as Administrator ?

Sebi330 wrote:Have you tried to run PR as Administrator ?

Yes of course.
And with different compatibility mode, too.

Same shit here. Got my PC formated, still doesnt work. Punched my wall and took a chunk of flesh cuz I hit the 2X4.

Anyways, a brand new clean PC and doesnt help. This is trully annoying as f***.

Post the contents of prError.log in your PR directory.

Also if it hangs like that , try booting your task manager and seeing if pr.exe is still running. Close it down. then try running again.

Also wait 30 seconds to a minute before trying to launch it again.

[R-DEV]Twisted Helix wrote:Post the contents of prError.log in your PR directory.

Also if it hangs like that , try booting your task manager and seeing if pr.exe is still running. Close it down. then try running again.

Also wait 30 seconds to a minute before trying to launch it again.

prError.log contains a record:

System.ArgumentException: Имя папки C:\Users\Admin\Documents/Battlefield 2/Profiles/Default не допускается.
в System.IO.FileSystemWatcher.set_Path(String value)
в o..ctor(String A_0)
в g.a(String[] A_0)

There is some russian words that mean:

System.ArgumentException: Folder Name C:\Users\Admin\Documents/Battlefield 2/Profiles/Default not allowed
в System.IO.FileSystemWatcher.set_Path(String value)
в o..ctor(String A_0)
в g.a(String[] A_0)

Thanks [R-DEV]Twisted Helix whose answer helped me understand what the problem is.

For me the decision was a copy from the Default folder in the C:\Users\Admin\Documents/Battlefield 2/Profiles/ from C:\Users\Stadtherz\Documents\Battlefield 2 (thats my user login).

And now everything works.


Nevertheless, I must test the solution for some time, to make sure everything is stable

Here is what I got.



16 octobre 2010 20:57:21
---------------------------------
System.ArgumentException: repertory name C:\Users\Jonathan\Documents/Battlefield 2/Profiles/Default is not valid.
? System.IO.FileSystemWatcher.set_Path(String value)
? o..ctor(String A_0)
? g.a(String[] A_0)

16 octobre 2010 20:59:33
---------------------------------
System.ArgumentException: Le nom de r?pertoire C:\Users\Jonathan\Documents/Battlefield 2/Profiles/Default n'est pas valide.
? System.IO.FileSystemWatcher.set_Path(String value)
? o..ctor(String A_0)
? g.a(String[] A_0)

16 octobre 2010 21:01:34
---------------------------------
System.ArgumentException: Le nom de r?pertoire C:\Users\Jonathan\Documents/Battlefield 2/Profiles/Default n'est pas valide.
? System.IO.FileSystemWatcher.set_Path(String value)
? o..ctor(String A_0)
? g.a(String[] A_0)

16 octobre 2010 21:02:57
---------------------------------
System.ArgumentException: Le nom de r?pertoire C:\Users\Jonathan\Documents/Battlefield 2/Profiles/Default n'est pas valide.
? System.IO.FileSystemWatcher.set_Path(String value)
? o..ctor(String A_0)
? g.a(String[] A_0)

16 octobre 2010 21:14:18
---------------------------------
System.ArgumentException: Le nom de r?pertoire C:\Users\Jonathan\Documents/Battlefield 2/Profiles/Default n'est pas valide.
? System.IO.FileSystemWatcher.set_Path(String value)
? o..ctor(String A_0)
? g.a(String[] A_0)

16 octobre 2010 21:16:15
---------------------------------
System.ArgumentException: Le nom de r?pertoire C:\Users\Jonathan\Documents/Battlefield 2/Profiles/Default n'est pas valide.
? System.IO.FileSystemWatcher.set_Path(String value)
? o..ctor(String A_0)
? g.a(String[] A_0)

16 octobre 2010 21:17:33
---------------------------------
System.ArgumentException: Le nom de r?pertoire C:\Users\Jonathan\Documents/Battlefield 2/Profiles/Default n'est pas valide.
? System.IO.FileSystemWatcher.set_Path(String value)
? o..ctor(String A_0)
? g.a(String[] A_0)

16 octobre 2010 21:27:23
---------------------------------
System.ArgumentException: Le nom de r?pertoire C:\Users\Jonathan\Documents/Battlefield 2/Profiles/Default n'est pas valide.
? System.IO.FileSystemWatcher.set_Path(String value)
? o..ctor(String A_0)
? g.a(String[] A_0)

16 octobre 2010 22:03:54
---------------------------------
System.ArgumentException: Le nom de r?pertoire C:\Users\Jonathan\Documents/Battlefield 2/Profiles/Default n'est pas valide.
? System.IO.FileSystemWatcher.set_Path(String value)
? o..ctor(String A_0)
? g.a(String[] A_0)

16 octobre 2010 22:35:30
---------------------------------
System.ArgumentException: Le nom de r?pertoire C:\Users\Jonathan\Documents/Battlefield 2/Profiles/Default n'est pas valide.
? System.IO.FileSystemWatcher.set_Path(String value)
? o..ctor(String A_0)
? g.a(String[] A_0)

16 octobre 2010 22:37:06
---------------------------------
System.ArgumentException: Le nom de r?pertoire C:\Users\Jonathan\Documents/Battlefield 2/Profiles/Default n'est pas valide.
? System.IO.FileSystemWatcher.set_Path(String value)
? o..ctor(String A_0)
? g.a(String[] A_0)

17 octobre 2010 06:05:27
---------------------------------
System.ArgumentException: Le nom de r?pertoire C:\Users\Jonathan\Documents/Battlefield 2/Profiles/Default n'est pas valide.
? System.IO.FileSystemWatcher.set_Path(String value)
? o..ctor(String A_0)
? g.a(String[] A_0)

17 octobre 2010 07:06:45
---------------------------------
System.ArgumentException: Le nom de r?pertoire C:\Users\Jonathan\Documents/Battlefield 2/Profiles/Default n'est pas valide.
? System.IO.FileSystemWatcher.set_Path(String value)
? o..ctor(String A_0)
? g.a(String[] A_0)

QCRulzz, looks like your problem is same as mine. Try my solution.

Stadtherz wrote:QCRulzz, looks like your problem is same as mine. Try my solution.

thanks, i'll try it tonight

For me the decision was a copy from the Default folder in the C:\Users\Admin\Documents/Battlefield 2/Profiles/ from C:\Users\Stadtherz\Documents\Battlefield 2 (thats my user login).

And now everything works.


I copied the content of the ORIGINAL BF2 file (in program files, ea games) into my documents, if thats what you meant. Still nothing.

QCRulzz wrote:
I copied the content of the ORIGINAL BF2 file (in program files, ea games) into my documents, if thats what you meant. Still nothing.

No need to change anything in Programm files\ea games and so on.

How many user profiles on Win7 do you have?

I'll try to explain more intelligibly.

I have 2 user profiles in Win 7. 1st is my Admin profile, 2d is my User profile (Stadtherz). I installed BF2 and PR on my User profile. So BF2 create configuration files in my C:\Users\Stadtherz\Documents\Battlefield 2 folder.

But, for some unknown reasons PR took BF2 config files (such as Audio.con, Profile.con, Video.con etc.) from my admin's documents directory C:\Users\Admin\Documents/Battlefield 2/Profiles/ where they were not.

So, I put it from user's folder to admin's.

Ahhh ok, no sir, only have 1 profile.

Then try to create folder on the path "C:\Users\Admin\Documents/Battlefield 2/Profiles" and copy to it Default folder with your config files.

Hope it will help you.

Thats what I did in the earlier post, still nothing... Think I'll wait till next patch, this one is fu***d up.

what is the solution ?

Stadtherz wrote:Thanks [R-DEV]Twisted Helix whose answer helped me understand what the problem is.

For me the decision was a copy from the Default folder in the C:\Users\Admin\Documents/Battlefield 2/Profiles/ from C:\Users\Stadtherz\Documents\Battlefield 2 (thats my user login).

And now everything works.


Nevertheless, I must test the solution for some time, to make sure everything is stable

I don't understand, what shall I do. my default folder was inside the bf2 folder already. also i dont have a folder called Battlefield 2 in documents !

BigBoibe wrote:I don't understand, what shall I do. my default folder was inside the bf2 folder already. also i dont have a folder called Battlefield 2 in documents !

You need to run BF2 once, login/make a profile, THEN start PR

my problem is when i install my pr at the finallizing installation it hangs then when i wait another half hour it continous and until updating punkbuster then it says "pbsetup.exe has stopped working A problem caused the program to stop working correctly.Windows will close the program and notify you if a solution is available".then i manually update the punkbuster and it keeps saying that kind of error

THEN btw i cant see any servers when im updating the servers list i download the PR standalone in torrent not in steam plsssss help me